Need to mix up that perfect batch of paint, thinned just so for your brush or next air brush job? Or perhaps now that the model is finished you want to store any leftover for future touch ups …

Recently I had to balance a foamie glider. Taping lead or coins to the plane always looks a bit crude. This time I balanced the plane using the tape method, but then took it a little farther. When …

A blade from a broken prop is an excellent removal tool when using hook and loop material to hold batteries to your airplane. It is usually difficult to remove the component without damage to the mounting or surrounding …

The nylon tie wraps provided to hold a plastic exhaust deflector to the muffler frequently fail to work, with loss of the deflector during engine run. I fix the deflector in place with small screws. Position the deflector …

Recently I salvaged an internal PC fan from a computer destined for the scrap heap. I now power it using a 3S 11.1v Lipo battery. I use Deans connectors on my batteries and so I soldered one to …

Like many modelers I have found that removing covering film can be challenging. Even when using heat, the color and adhesive layers often separate from the film, leaving fragments that have been difficult to remove. Ordinary packing tape …

I’ve never liked using Allen wrenches to tighten prop nuts; I find them difficult to hold and they just aren’t the right tool for the job. So I decided to create a better tool. I searched through an …

I have several park flyers and recently hit on this idea for easy transportation and convenient storage for them. I bought a cheap foam cooler and notched the sides to accept the wings with the models positioned nose-down. …

I was given a 380-class helicopter and am very impressed with it. Like any novice, I expected some crashes, and I wasn’t disappointed! The instructions about making repairs with new parts are very clear, but I thought I’d …

After searching in vain for a model hold-down that would keep my model off the ground while I broke in my new engine in clean air, I decided to build my own. I drilled a couple of 1-inch …

I enjoy flying off snow, and I developed a way to preserve the power in my backup batteries while on the flight line in cold weather. I fill a Ziploc bag with uncooked rice, microwave it for a …

The Canadair CL-415 commonly called the Scooper was the first model in a series of firefighting flying boat amphibious aircraft built by Canadian Air and later Bombardier.  The CL-415 is a twin engine, high-dash wing aircraft designed to …

Learn To Fly An Indoor Micro Electric! In this column I will concentrate on products designed to help newcomers earn their wings.  In a related series in Fly RC, David Baron, an esteemed contributor, and Fly RC’s Chief …